Communication Optical Cable Cross Connecting Cabinet is the interface equipment suitable for the exchanging between trunk optical cable and optical distribution cable. It is integrating heat sealing, roll storage and distribution of the fiber. It can be mounted both floor and aerial modes.
Single-sided front door；
Single-sided left and right front door.
Fiber to The Point (FTTX);
Fiber to The Home (FTTH);
Fiber to The Building(FTTB)；
Passive Optical Networks (PON)；
Cable Television (CATV)；
Network Equipment Room.
It is designed and manufactured according to the latest revised edition of YD/T 998 trade criterion.
Cabinet body adopts two kinds of materials including Sheet Molding Compound (SMC) and stainless steel.
Heat insulation device can be installed inside stainless steel box body according to users’requirements to withstand the effect of climate and environment.
Apply optical fiber splice tray of double-sided structure to make full use of the two sides of the board, and integrate heat sealing and wiring into one unity. Each board can be fixed with twelve FC/SC/ST type adapters.
Install adaptor on the face side of optical fiber splice tray in a bayonet way at an oblique angle of 30 degrees to ensure curve radius of optical fiber and prevent from being damaged by laser light.
It is applied to common optical cables and ribbon-shaped optical cables, with large wiring space. All optical cables and optical fibers can be effectively protected inside the distribution frame.
Cabinet door lock has good protection function against breaking and is flexible and reliable to unlock and lock up. The opening angle of box door is more than 120 degrees. The box is well sealed.
Users can choose suitable base and platform for fixing electric pole.