The fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of corrugated steel tape. Between the corrugated steel tape and the loose tube water-blocking material is applied to keep the cable

Equipment of construction equipment1.Tension machine: Tension machine is a necessary tool in the process of optical cable construction. The tension of the tension machine should be flexibly adjustable. The range of tension change should be between 1～5kN. The wheel diameter of the tension mach

1. Stable and Longtime agreement with our raw materials supplier (PE/PBT/Aramid yarn/Gel filling etc.. ), ensure our VIP customer orders are also first-come, first-served;2. Available Stock for raw materials Especially for urgent orders.3. Priority Electricity supply ensures continuous factory produ

The most cost-effective solution for use on short and medium spans. It will have a smaller diameter and be lighter compared to a double jacket design. The fiberglass yarn provides a degree of rodent resistance.FeaturesMaximum reted design tension up to2248 lb with span lengths up to 656 ft &n

This drop cable is designed for duct installation in FTTH project connecting. The optical fiber unit is positioned in the center. 2 parallel strength members are placed at two sides. The cable is with a jacket to become FTTH Drop Cable. Then FTTH Drop Cable is completed with waterproof tape, AL-plas